Washington — OSHA area offices must apply a four-part test before issuing General Duty Clause citations for respiratory hazards that do not have a permissible exposure limit, the agency states in a memorandum sent to regional administrators.
In the memo, issued Nov. 2, Kim Stille, acting director of OSHA’s Directorate of Enforcement Programs, writes that area offices cannot base a General Duty Clause citation on only a “measured exposure” in excess of an occupational exposure limit or a documented exposure to a “recognized carcinogen.” Instead, they must use the following tests in those situations:
1. The employer failed to keep the workplace free of a hazard to which employees of that employer were exposed.
2. The hazard was recognized.
3. The hazard was causing or was likely to cause death or physical harm.
4. A feasible and useful method to correct the hazard was available.
“Unless the case file evidence proves all four of the above elements, the area office should issue a hazard alert letter,” Stille states in the memo.
Stille also provides guidance for each piece of the four-part test, and includes a sample hazard alert letter. She notes that the General Duty Clause is “occasionally used to cite respiratory hazards from exposure to an air contaminant that is not covered by an OSHA permissible exposure limit.”
Retrieved from Safetyandhealthmagazine.com
Related Training DVDs:
Respiratory Protection and Safety Training
Provide employees with this important information and help facilities in complying with requirements of the OSHA Respiratory Standard. View Product
An Effective Respiratory Protection Program
Assists you in the development of an effective respirator program, addresses some of the hazards and the basics of respiratory protection. View Product
Respirators and How To Use Them Training
This program is designed to give you some information about personal protection under adverse or hazardous conditions. View Product
The post OSHA memo: Area offices must use four-part test when citing respiratory hazards without PELs appeared first on Atlantic Training Blog | EHS Training Downloads.